Matt’s RV7 Build Log

–Scotchbrite stiffeners
–Started dimpling stiffeners 

Note: Dimpled one of the E720H stiffeners on the wrong side. Ordered replacement from Van’s. 

–Finished trailing edge riveting
–Started rolling leading edges 

The trailing edge was finished with very good results. It’s well within spec. I’m very happy overall.Next up was the leading edges.

After testing a number options, I used a 3/4″ wooden dowel to roll the edges. The rolling went ok, but I still can’t get the 2 edges close enough to cleco. Also in trying the leading edge to bend more I slightly creased the leading edges. I finally gave up for the night fearing I would screw more stuff up.

–Riveted VS rear spar and skeleton

Note: Bad rivet on VS 707 to 702 caused bending in the rib flange. I don’t like the looks of it and need to fix.