Rud: Trailing Edge Time!
–Drilled aluminum angle jig
–Cleaned trailing edge of skins and the AEX wedge with MEK
–Prosealed trailing edge.
Well the big day has come and gone. Again since I did A LOT of blog reading ahead of time it went really well. Yes, Pro Seal is messy to work with but that’s what rubber gloves and paper towels are for. I used MEK for the first time to clean the parts. It stinks a heck of a lot more that acetone. After applying the Pro Seal everything got clecoed into the alum angle jig and left to cure for 2 days per the manual.
Tags: AEX, cleco, jig, MEK, pro seal, skin, trailing edge, wedge