Matt’s RV7 Build Log

–Removed blue vinyl from inside of skin and cleaned with acetone
–Started riveting rudder skin to skeleton.

Riveted the bottom rib and left side of spar. I was able to get to all the holes with 426 rivets but the last one. I’ll just put a pop rivet in there as Van’s suggests.

This entry was posted on Wednesday, August 15th, 2007 at 8:00 pm and is filed under Empennage, Rudder. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.